Rolling bearings
Main page → Hardware → Bearings → Rolling bearings
Standard ball bearings
Deep groove ball bearings
Single row ball bearings
Series:
160xx, 6xx, 60xx, 62xx, 63xx, 64xx, 618xx, 619xx
Double row ball bearings
Series:
42xx, 43xx
Self-aligning ball bearing
Standard self-aligning ball bearings
With cylindrical or tapered (K) bore
Series:
10x, 12x, 13x, 10xx, 12xx, 13xx, 22xx, 23xx
Self-aligning ball bearings with extended inner ring
Series:
112xx
Angular contact ball bearings
Single row angular contact bearings
Series:
718xx, 70xx, 72xx, 73xx
Double row angular contact bearings
With solid or split (DA) inner ring
Series:
38xx, 30xx, 32xx, 33xx
Four-point contact ball bearings
Split inner ring
Series:
QJ2xx, QJ3xx
Axial ball bearings
Single row axial ball bearings
Series:
511xx, 512xx, 513xx, 514xx
Double row axial ball bearings
Series:
522xx, 523xx
Single row self-aligning axial ball bearings
Series:
532xx, 533xx
Double row selfaligning axial ball bearings
Series:
542xx, 543xx
Stainless steel SNR ball bearings with food grease
- 100% stainless steel: balls, inner and outer rings, separator and seal frame
- Nitrile seal (of blue color for better detection)
- NSF category H1 approved
- Operating temperature range: -30°C to +120°C
- Halal / Kosher approved
KLM Bearings is a brand owned by Kavial Ltd. KLM Bearings was created to fill a niche in our product line between premium bearing brands and lesser known budget (economy) manufacturers. The KLM Bearings product line, which covers almost the entire range of both ball and roller bearing series, is designed to be the golden mean for our customers and to offer an alternative with an acceptable price-quality ratio. The line consists of both custom-made bearings, as well as repackaged products from third-party manufacturers. All KLM Bearings products comply with all necessary international industry standards, have all the necessary quality certificates and are thoroughly tested in Kavial's own QA department.
Standard roller bearings
Cylindrical roller bearings
SL-series
Cylindrical roller bearings without separator
Series:
SL18xx, SL19xx, SL024x, SL014x, SL04xx
N-series
Without ribs on outer (N) or inner (NU) ring; with one rib on inner ring (NJ); with one detachable rib on inner ring (NUP); with angle ring on inner ring (HJ)
Series:
N2xx, N3xx, NU10xx, NU19xx, NU2xx, NU3xx, NU4xx, NU22xx, NU23xx, NJ2xx, NJ3xx, NJ4xx, NJ22xx, NJ23xx, NUP2xx, NUP3xx, NUP22xx, NUP23xx
Spherical roller bearings
With cylindrical or tapered (K) bore; with adapter (H) or withdrawal (AH) sleeve
Double row spherical roller bearings
Inner ring raceway with solid central rib; wihtout central rib (E1); with detachable central rib washer (BE)
Series:
213xx, 222xx, 223xx, 230xx, 231xx, 232xx, 240xx, 241xx
Single row barrel roller bearings
Series:
202xx, 203xx
Single row toroidal roller bearings
Series:
C39xx, C30xx, C40xx, C31xx, C41xx, C22xx, C32xx, C23xx
Tapered roller bearings
Tapered roller bearings
Single row tapered roller bearings
Series:
302xx, 303xx, 313xx, 320xx, 322xx, 323xx, 329xx, 330xx, 331xx, 332xx
Sealed tapered roller bearings
Lip seal on one side
Series:
JK0Sxxx
T-series tapered roller bearings
Series:
T2.., T4.., T5.., T7..
K-series tapered roller bearings
Tapered roller bearings in inch sizes
Axial-tapered roller bearings
Axial-tapered roller bearings with cylindrical rollers
With single (811, 812) or double rollers (893, 894)
Series:
811xx, 812xx, 893xx, 894xx
With single (K811, K812) or double rollers (K893, K894) without rings
Series:
K811xx, K812xx, K893xx, K894xx
Axial-tapered roller bearings with conical rollers
Series:
KTxxxx
Axial-tapered roller bearings with assymetrical barrel rollers
Series:
293xx, 294xx
FAG NJ23-ILR series cylindrical roller bearings
- Up to 24% more dynamic basic load durability
- High-performance MPAX cage
- DIN5412-1 standard – 100% interchangeable with NJ23xx roller bearings
- Optional Durotect-B coating for rings and rollers
NJ23xx-ILR series in medias catalog
NJ23xx-ILR series .pdf infopage
KIZEI spherical roller bearings
- Nitrided steel cage and shields for better shock resistance
- Load ratings and speeds are similiar to ULTAGE series
- ISO suurused – 100% interchangeable with standard open bearing
- 2 times longer life time, 3 times less relubrications
Infopage about NTN-SNR ULTAGE/KIZEI series .pdf catalog for NTN-SNR KIZEI series
Standard needle roller bearings
Needle rollers without rings
Standard needle rollers without rings
Single or double row (ZW)
Series:
KxXxXx
Crankshaft needle roller bearings
Crank pin needle rollers
Series:
KZKxXxXx
Piston pin needle rollers
Series:
KBKxXxXx
Drawn cup needle roller bearings
Drawn cup needle rollers with separator
Series:
HKxxxx
Closed end drawn cup needle rollers with separator
Series:
BKxxxx
Drawn cup needle rollers without separator
Series:
HNxxxx
Needle roller bearings with massive rings
Standard needle rollers with massive rings
With inner ring (NKI, NKIS, NA); without inner ring (NK, NKS, RNA); without ribs on outer ring (NAO, RNAO)
Series:
NKIxx/xx, NKISxx, NA48xx, NA49xx, NA69xx, NKxx/xx, NKSxx, RNA48xx, RNA49xx, RNA69xx
Self-aligning needle roller bearing
With (RPNA) or without (PNA) inner ring
Series:
RPNAxx/xx, PNAxx/xx
Inner rings for needle roller bearings
Standard (IR) or with lubrication hole (IS1)
Series:
IRxXxXx, IRxXxXx-IS1
Axial needle rollers
Standard axial needle rollers without rings
Series:
AXKxxx
Axial needle rollers with centering washer
Series:
AXWxxx
Rings for AXK axial needle rollers
Series:
AS
Locating washers for axial bearings
Series:
GS, WS, LS
Special bearings
Mast rollers
Standard rollers
Combined rollers
Chain rollers
Axle rollers
.pdf catalog for mast rollers Winkel's .pdf catalog for combined bearings Winkel's general .pdf catalog
Track-rollers
Yoke type rollers:
RSTO, RNA22xx, STO, NA22xx, NATRxx, NATVxx, NUTRxx, PWTRxx, NNTRxx
Stud type rollers:
KRxx, KRVxx, NUKR, PWKRxx, KRExx, NUKRE, PWKRExx
Guide rollers:
LR6, LR60, LR2, ZL2xx-DRS, L52xx-DRS, KR52xx, ZLE52xx, KLRU, KLRZ, LFR5
Combined bearings
Axial ball bearings with
needle rollers:
NX, NXxx-Z, NXxx-IR, NKX, NKXxx-Z
Axial roller bearings with
needle rollers:
NKXR, NKXRxx-Z
Angular contact ball
bearings with needle
rollers:
NKIA, NKIB
Cage assemblies
General .pdf catalog for cage assemblies .pdf catalog for cage assemblies (with needle rollers) .pdf catalog for cage assemblies (linear) .pdf catalog for cage assemblies (wired)
Polymer bearings
Single row deep groove ball bearings with POM rings and glass-ceramic balls
Series:
6xx, 60xx, 62xx, 63xx, 64xx
Sample catalog of SMB Bearings ceramic bearings Sample catalog of SMB Bearingss POM bearings
Automotive bearings
This section is being updated. Check out the catalogs.
Rolling elements
Tootepilt (võib olla illustrsatiivne) | Product name and manufacturer | D1 Laagri siseläbimõõt, võlliava | D2 Laagri välisläbimõõt | D3 Laagri paksus/laius | Stock | One piece price (ex. VAT) | Choose quantity and add to cart |
|---|---|---|---|---|---|---|---|
 | GB.40246.S02 SNR PEUGEOT 3350.91 CITROEN 3350.27 PEUGEOT 3350.27 ROVER ANR5861 PEUGEOT 3350-91 PEUGEOT 3350-27 LAND ROVER ANR5861 FIAT 9567217680 FIAT 7174473 CITROEN 3350-27 44×82,5×37 | 44 | 82.5 | 37 | 5pc | €42.10 + VAT | |
| 6212 T2C4PX NTN 60x110x22 | 60 | 110 | 22 | 13pc | €123.83 + VAT | |
| K24X28X10-A/0-7 INA 24x28x10 | 24 | 28 | 10 | 5pc | €5.46 + VAT | |
| 30221 SZPK 105x190x39 | 105 | 190 | 39 | 12pc | €39.00 + VAT | |
| RMS6 ZEN 19,05×50,8×17,4625 | 19.05 | 50.8 | 17.4625 | 9pc | €21.20 + VAT | |
| B538DDX RHP 15,875×26,988×6,35/7,14 | 15.875 | 26.988 | 6.35 | 8pc | €11.63 + VAT | |
| RMS6-2RS ZEN 19,05×50,8×17,4625 | 19.05 | 50.8 | 17.4625 | 10pc | €28.90 + VAT | |
| RLS20 KLM 63,5x127x23,813 | 63.5 | 127 | 23.813 | 7pc | €60.00 + VAT | |
| RLS4-2RS ZEN 12,7×33,33×9,525 | 12.7 | 33.33 | 9.525 | 1pc | €7.80 + VAT | |
| RLS16 ZEN 50,8×101,6×20,63 | 50.8 | 101.6 | 20.63 | 8pc | €26.68 + VAT | |
| LS15 FAG 50,8×101,6×20,63 | 50.8 | 101.6 | 20.63 | 2pc | €70.25 + VAT | |
| RLS10-2RS MBA 31,75×69,85×17,462 | 31.75 | 69.85 | 17.462 | 11pc | €26.30 + VAT | |
| RLS10-2RS1 SKF 31,75×69,85×17,462 | 31.75 | 69.85 | 17.462 | 3pc | €50.97 + VAT | |
| RLS11-2RS DYZV 34,925×76,2×17,462 | 34.925 | 76.2 | 17.462 | 20pc | €28.95 + VAT | |
| RLS12.2RS KLM 38,1×82,55×19,05 | 38.1 | 82.55 | 19.05 | 13pc | €30.70 + VAT | |
| LJ1.5/8-2RS NIS 41,275×88,9×19,05 | 41.275 | 88.9 | 19.05 | 2pc | €30.00 + VAT | |
| LJ1.3/4"(RLS14) MBA 44,45×95,25×20,64 | 44.45 | 95.25 | 20.64 | 1pc | €37.26 + VAT | |
| RLS8-2RS ZEN 25,4×57,2×15,875 | 25.4 | 57.2 | 15.875 | 4pc | €11.28 + VAT | |
| RLS4.2Z KLM 12,7×33,33×9,525 | 12.7 | 33.33 | 9.525 | 40pc | €2.25 + VAT | |
| LJ5/8".2ZR YC RHP 15,875×39,688×11,112 | 15.875 | 39.688 | 11.112 | 7pc | €13.55 + VAT | |
| RLS6-2RS ZEN 19,05×47,625×14,29 | 19.05 | 47.625 | 14.29 | 1pc | €10.90 + VAT | |
| RLS6-ZZ ZEN 19,05×47,625×14,29 | 19.05 | 47.625 | 14.29 | 12pc | €10.85 + VAT | |
| RMS15 C3 FAG 47,625×114,3×26,9875 | 47.625 | 114.3 | 26.9875 | 1pc | €148.17 + VAT | |
| RMS16.2RS MBA 50,8×114,3×26,98 | 50.8 | 114.3 | 26.98 | 4pc | €66.02 + VAT | |
| RMS20 MBA 63,5×139,7×31,75 | 63.5 | 139.7 | 31.75 | 3pc | €124.95 + VAT |